A: Disconnect the battery's negative cable, raise the vehicle, and drain the transaxle fluid. Remove the starter motor, disconnect driveaxles, speedometer cable, wire harness, and oil cooler hoses. Remove interfering exhaust components, disconnect TV and Shift Cables. Support the engine and transaxle, remove the torque converter cover and bolts, and the transaxle mount nuts and bolts. Disconnect interfering chassis or suspension components, disengage the transaxle from the engine block dowel pins, and lower the transaxle. Ensure the torque converter hub is engaged in the pump, raise the transaxle, align the torque converter with the drive plate, and install the transaxle housing-to-engine bolts. Reconnect the shift and TV cables, driveaxles, speedometer cable, and fluid cooler lines. Adjust the shift linkage, install exhaust system components, lower the vehicle, fill the transaxle, and check for leaks.