What Steps Should Be Followed When Overhauling Front Brake Calipers on an Acura Legend?

If an overhaul is indicated, usually due to fluid leakage, explore all options before beginning the job. New and factory rebuilt calipers are available on an exchange basis, making this task quite easy. If you choose to rebuild the calipers, ensure a rebuild kit is available beforehand and always rebuild the calipers in pairs. To start, loosen the lug nuts on the front wheels without removing them, then raise the front of the vehicle and secure it on jackstands before removing the front wheels. Disconnect the brake line from the caliper and plug it with a short piece of rubber hose to prevent brake fluid leakage and contamination. Remove the caliper, then place it on a clean workbench. If there are any pad retainers, note their installation before removing them and pry out the dust boot. To remove the piston, place a wood block between the piston and caliper to prevent damage, then apply compressed air to the brake fluid hose connection to ease the piston out of its bore, being cautious not to place fingers between the piston and caliper. Inspect the mating surfaces of the piston and caliper bore wall; if there is any scoring, rust, or pitting, replace the complete caliper unit. If the components are in good condition, remove the piston seal using a wooden or plastic tool to avoid damaging the bore. Remove all mounting bolts, dust boots, and sleeves from the caliper ears, then wash all components in brake cleaner or alcohol. To reassemble, ensure you have the correct rebuild kit, submerge the new piston seal in brake fluid, and install it in the lower groove of the caliper bore, followed by the boot in the upper groove. Lubricate the piston with clean brake fluid, carefully slide it through the new boot, and apply firm pressure to install it, ensuring the piston boot seats properly. If equipped, lubricate the sleeves with silicone-based grease and push them into the caliper ears, then install the boots and lubricate the caliper pins with silicone grease. Finally, install the caliper by reversing the removal procedure, replace the copper sealing washer on either side of the brake line fitting, bleed the brake system, install the wheels, hand tighten the lug nuts, remove the jackstands, lower the vehicle, and tighten the wheel lug nuts to the specified torque.

Genuine Acura Brake Caliper

Caliper

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

378 Brake Calipers found

View related parts
Acura Front Cylinder Kit
Part Number: 01463-S87-A00
$31.70 MSRP: $44.22
You Save: $12.52 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Caliper Set, Front ; Caliper Overhaul Kit; Caliper Overhaul Kit, Caliper Seal Kit
- Position: Front
- Replaces: 01463-ST7-R00, 01463-SM4-000, 01463-SV4-000
Fits the following Acura Models:
- CL 2001-2003, 1997-1999
- Integra 2000-2001, 1997-1998
- RL 1999-2004
- TL 1995-2006
- TSX 2004-2014
View More
View related parts
Acura Front Cylinder Kit
Part Number: 01463-STX-A01
$48.12 MSRP: $67.12
You Save: $19.00 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Caliper Set, Front ; Caliper Seal Kit; Caliper Seal Kit
- Position: Front
- Replaces: 01463-STX-A00
Fits the following Acura Models:
- MDX 2007-2013
- ZDX 2010-2013
View related parts
Acura Right Rear Caliper Sub-Assembly
Part Number: 43018-TA0-A81
$196.08 MSRP: $280.03
You Save: $83.95 (30%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Caliper Sub-Assembly, Right Rear; Caliper
- Position: Passenger Side
- Replaces: 43018-TA0-A51, 43018-TA0-A52, 43018-TA0-A60
Fits the following Acura Models:
- TSX 2009-2014
View related parts
Acura Disc Brake Caliper, Right Front
Part Number: 45018-SEP-A60
$539.27 MSRP: $770.17
You Save: $230.90 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Caliper Sub-Assembly, Right Front; Caliper
- Position: Passenger Side
- Replaces: 45018-SEP-A50, 45018-SEP-A51
Fits the following Acura Models:
- TL 2004-2008
View related parts
Acura Front Caliper Set
Part Number: 01463-ST7-000
$58.67 MSRP: $81.83
You Save: $23.16 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Caliper Set, Front
- Position: Front
Fits the following Acura Models:
- Integra 1994-2001
View related parts
Acura Disc Brake Caliper
Part Number: 43019-TZ5-A11
$366.75 MSRP: $523.78
You Save: $157.03 (30%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Caliper Sub-Assembly, Left Rear ; Caliper Sub-Assembly, Driver Side Rear; Caliper, Caliper Assembly
- Position: Driver Side
- Replaces: 43019-TZ5-A10
Fits the following Acura Models:
- MDX 2017-2020
View related parts
Acura Front Brake-Disc Brake Caliper Seal Kit
Part Number: 01463-SJC-A01
$66.29 MSRP: $92.45
You Save: $26.16 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Set,Front Caliper; Caliper Seal Kit
- Position: Front
- Replaces: 01463-SJC-A00
Fits the following Acura Models:
- TL 2009-2014
- TLX 2015-2020
View related parts
Acura Housing Assembly L
Part Number: 45002-TYA-A02
$273.47 MSRP: $390.57
You Save: $117.10 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: HOUSING ASSY.L; Caliper
- Position: Driver Side
Fits the following Acura Models:
- MDX 2022-2026
View related parts
Acura Rear Right Brake Caliper
Part Number: 43018-TZ5-A11
$366.75 MSRP: $523.78
You Save: $157.03 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Caliper Sub-Assembly, Right Rear; Caliper, Caliper Assembly
- Position: Passenger Side
- Replaces: 43018-TZ5-A10
Fits the following Acura Models:
- MDX 2017-2020
View related parts
Acura Left Front Caliper Sub-Assembly
Part Number: 45019-SEP-A60
$539.27 MSRP: $770.17
You Save: $230.90 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Caliper Sub-Assembly, Left Front; Caliper
- Position: Driver Side
- Replaces: 45019-SEP-A50, 45019-SEP-A51
Fits the following Acura Models:
- TL 2004-2008
View related parts
Acura Caliper Sub-Assembly
Part Number: 45018-TGV-A00
$243.96 MSRP: $348.42
You Save: $104.46 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Caliper
- Position: Passenger Side
Fits the following Acura Models:
- TLX 2021-2025
View related parts
Acura Left Rear Caliper Sub-Assembly
Part Number: 43019-S03-Z03
$363.02 MSRP: $518.45
You Save: $155.43 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Caliper Sub-Assembly, Left Rear; Caliper
- Position: Driver Side
- Replaces: 43019-S03-Z02
Fits the following Acura Models:
- Integra 2000-2001, 1998
View related parts
Acura Caliper Sub-Assembly
Part Number: 45019-TGV-A00
$243.96 MSRP: $348.42
You Save: $104.46 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Caliper
- Position: Driver Side
Fits the following Acura Models:
- TLX 2021-2025
View related parts
Acura Rear Caliper Sub-Assembly
Part Number: 43019-TYA-A00
$366.75 MSRP: $523.78
You Save: $157.03 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Caliper, Caliper Assembly
- Position: Driver Side
Fits the following Acura Models:
- MDX 2022-2026
View related parts
Acura Caliper Sub-Assembly, Left Front
Part Number: 45019-TYS-A50
$192.82 MSRP: $275.38
You Save: $82.56 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Position: Front Driver Side
Fits the following Acura Models:
- MDX 2017-2020
View related parts
Acura Left Rear Caliper Sub-Assembly
Part Number: 43019-TA0-A81
$196.06 MSRP: $280.00
You Save: $83.94 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Caliper Sub-Assembly, Left Rear; Caliper
- Position: Driver Side
- Replaces: 43019-TA0-A60, 43019-TA0-A51, 43019-TA0-A52
Fits the following Acura Models:
- TSX 2009-2014
View related parts
Acura Front Brake Caliper Right Passenger-Assembly
Part Number: 45018-TJB-A00
$430.24 MSRP: $614.45
You Save: $184.21 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Front Caliper Sub-Assembly; Caliper, Caliper Assembly
- Position: Passenger Side
Fits the following Acura Models:
- RDX 2019-2021
View related parts
Acura Left Rear Caliper Sub-Assembly
Part Number: 43019-T0G-A01
$229.98 MSRP: $328.45
You Save: $98.47 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Caliper Sub-Assembly, Left Rear
- Position: Rear Driver Side
- Replaces: 43019-T0G-A00
Fits the following Acura Models:
- RDX 2013-2018
View related parts
Acura Caliper Passenger Side F
Part Number: 45018-STX-A02RMN
$203.13 MSRP: $287.85
You Save: $84.72 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Position: Passenger Side
- Replaces: 45018-STX-A02RM
Fits the following Acura Models:
- MDX 2007-2013
- ZDX 2010-2013
View related parts
Acura Left Rear Caliper Sub-Assembly
Part Number: 43019-STX-A01
$279.24 MSRP: $398.80
You Save: $119.56 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Caliper Sub-Assembly, Left Rear; Caliper
- Position: Driver Side
- Replaces: 43019-STX-A00
Fits the following Acura Models:
- MDX 2007-2013
- ZDX 2010-2013

| Page 1 of 19 |Next >

1-20 of 378 Results

Acura Brake Caliper Parts Questions & Experts Answers

Right Rear Caliper Assembly (Cl11H) (Tokiko)
43210-SD4-015
Q: What Steps Should Be Followed When Overhauling Front Brake Calipers on an Acura Legend?
A:
If an overhaul is indicated, usually due to fluid leakage, explore all options before beginning the job. New and factory rebuilt calipers are available on an exchange basis, making this task quite easy. If you choose to rebuild the calipers, ensure a rebuild kit is available beforehand and always rebuild the calipers in pairs. To start, loosen the lug nuts on the front wheels without removing them, then raise the front of the vehicle and secure it on jackstands before removing the front wheels. Disconnect the brake line from the caliper and plug it with a short piece of rubber hose to prevent brake fluid leakage and contamination. Remove the caliper, then place it on a clean workbench. If there are any pad retainers, note their installation before removing them and pry out the dust boot. To remove the piston, place a wood block between the piston and caliper to prevent damage, then apply compressed air to the brake fluid hose connection to ease the piston out of its bore, being cautious not to place fingers between the piston and caliper. Inspect the mating surfaces of the piston and caliper bore wall; if there is any scoring, rust, or pitting, replace the complete caliper unit. If the components are in good condition, remove the piston seal using a wooden or plastic tool to avoid damaging the bore. Remove all mounting bolts, dust boots, and sleeves from the caliper ears, then wash all components in brake cleaner or alcohol. To reassemble, ensure you have the correct rebuild kit, submerge the new piston seal in brake fluid, and install it in the lower groove of the caliper bore, followed by the boot in the upper groove. Lubricate the piston with clean brake fluid, carefully slide it through the new boot, and apply firm pressure to install it, ensuring the piston boot seats properly. If equipped, lubricate the sleeves with silicone-based grease and push them into the caliper ears, then install the boots and lubricate the caliper pins with silicone grease. Finally, install the caliper by reversing the removal procedure, replace the copper sealing washer on either side of the brake line fitting, bleed the brake system, install the wheels, hand tighten the lug nuts, remove the jackstands, lower the vehicle, and tighten the wheel lug nuts to the specified torque.

Related Acura Parts

Browse by Model

ADX Brake Caliper CL Brake Caliper ILX Brake Caliper ILX Hybrid Brake Caliper Integra Brake Caliper Legend Brake Caliper MDX Brake Caliper NSX Brake Caliper RDX Brake Caliper RL Brake Caliper RLX Brake Caliper RSX Brake Caliper SLX Brake Caliper TL Brake Caliper TLX Brake Caliper TSX Brake Caliper Vigor Brake Caliper ZDX Brake Caliper