Acura 38920-P8C-A03 Compressor Belt (Bando)

To remove the drivebelt, note how it is routed, then use a wrench on the tensioner pulley center bolt and turn the tensioner counterclockwise to release the drivebelt tension. Fit the new drivebelt onto the crankshaft, alternator, power steering pump, and air conditioning compressor pulleys, as applicable. Then, turn the tensioner and locate the drivebelt on the pulley. Make sure the drivebelt is correctly seated in all of the pulley grooves, and then release the tensioner. To replace the tensioner pulley, remove the bolts securing the tensioner to the engine block and detach the tensioner from the engine. Installation is the reverse of removal, and be sure to tighten the tensioner (and pulley, if replaced) bolts.