How to Remove the Coil Springs and Shock Absorber Assembly from the Rear of an Acura Integra?

Loosen lug nuts, lift vehicle, and remove rear wheels. Support trailing arm with a jack, remove damper cover and shock absorber mounting nuts. Remove lower shock absorber bolt, lower jack and arm, and remove shock absorber/spring assembly. Installation is reverse of removal. Before tightening lower bolt, raise trailing arm to simulate ride height and tighten all fasteners.

What Should You Consider Before Starting Work on Coil Springs and Shock Absorber on Acura TL?

If the shocks or coil springs show signs of wear such as leaking fluid, loss of damping capability, or physical damage like chips, sagging, or cracks, consider all options before starting any work. The shock absorbers or coil springs cannot be serviced individually and must be replaced if issues arise, although complete assemblies may be available on an exchange basis, saving time and effort. Before disassembling the vehicle, check the cost and availability of parts. Begin by removing the shock absorber/coil spring assembly, working on one assembly at a time to avoid mixing parts. Mount the assembly in a vise, using wood or rags to protect it, and avoid over-tightening. Install the spring compressor according to the manufacturer's instructions, compressing the spring enough to relieve pressure from the upper spring seat, which can be confirmed by wiggling the spring. Mark the orientation of the upper mount relative to the spring or damper unit for proper reinstallation. Use an Allen wrench to hold the shock damper rod while unscrewing the self-locking retaining nut with a box-end wrench. Disassemble the parts in the order they are removed. For reassembly, carefully place the spring onto the shock absorber body, ensuring it rests in the lowest part of the seat, use a new self-locking nut, and tighten it to the specified torque. Before releasing the spring compressor, ensure the upper mount is oriented as it was originally. Once the spring compressor is removed, the assembly is ready for installation.

Genuine Acura Coil Springs

Strut Spring

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

277 Coil Springs found

View related parts
Acura Rear Coil Spring
Part Number: 52441-TJB-A03
$54.46 MSRP: $75.95
You Save: $21.49 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Spring, Rear; Coil Spring, Spring
- Position: Rear
Fits the following Acura Models:
- RDX 2019-2025
View related parts
Acura Front Right Spring (4Wd)
Part Number: 51401-TJB-A02
$43.57 MSRP: $60.77
You Save: $17.20 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Spring, Front R (4Wd); Coil Spring, Spring
- Position: Passenger Side
Fits the following Acura Models:
- RDX 2019-2025
View related parts
Acura Rear Spring
Part Number: 52441-TX4-A02
$67.23 MSRP: $93.77
You Save: $26.54 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Spring, Rear ; Coil Spring; Coil Spring, Spring
- Position: Rear
Fits the following Acura Models:
- RDX 2013-2015
View related parts
Acura Right Front Spring
Part Number: 51401-TZ6-A11
$91.54 MSRP: $128.42
You Save: $36.88 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Spring, Right Front ; Coil Spring; Coil Spring, Spring
- Position: Passenger Side
Fits the following Acura Models:
- MDX 2016-2020
View related parts
Acura Right Rear Spring
Part Number: 52441-TX6-A03
$51.60 MSRP: $71.97
You Save: $20.37 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Spring, Right Rear ; Coil Spring; Coil Spring, Spring
- Position: Passenger Side
Fits the following Acura Models:
- ILX 2013-2015
View related parts
Acura Right Front Spring
Part Number: 51401-TZ6-A01
$68.62 MSRP: $95.70
You Save: $27.08 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Spring, Right Front ; Coil Spring
- Position: Front Passenger Side
Fits the following Acura Models:
- MDX 2014
View related parts
Acura Spring, Right Front
Part Number: 51401-TX6-A04
$66.13 MSRP: $92.23
You Save: $26.10 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Coil Spring; Spring
- Position: Passenger Side
Fits the following Acura Models:
- ILX 2013-2015
View related parts
Acura Left Rear Spring
Part Number: 52446-TX6-A03
$51.48 MSRP: $71.80
You Save: $20.32 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Spring, Left Rear ; Coil Spring; Coil Spring, Spring
- Position: Driver Side
Fits the following Acura Models:
- ILX 2013-2015
View related parts
Acura Coil Spring, Rear
Part Number: 52441-SZN-A02
$78.18 MSRP: $109.68
You Save: $31.50 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Spring, Rear ; Coil Spring; Coil Spring, Spring
- Position: Rear
Fits the following Acura Models:
- ZDX 2010-2013
View related parts
Acura Rear Coil Spring
Part Number: 52441-TZ6-A03
$102.87 MSRP: $144.32
You Save: $41.45 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Spring, Rear; Coil Spring, Spring
- Position: Rear
Fits the following Acura Models:
- MDX 2015
View related parts
Acura Right Front Spring
Part Number: 51401-STK-A03
$57.71 MSRP: $80.48
You Save: $22.77 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Spring, Right Front ; Coil Spring; Coil Spring, Spring
- Position: Passenger Side
Fits the following Acura Models:
- RDX 2007-2012
View related parts
Acura Coil Spring Rear
Part Number: 52441-STK-A01
$187.70 MSRP: $268.07
You Save: $80.37 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Spring, Rear ; Coil Spring; Coil Spring, Spring
- Position: Rear
Fits the following Acura Models:
- RDX 2007-2012
View related parts
Acura Left Front Spring
Part Number: 51406-TX4-A02
$85.76 MSRP: $120.32
You Save: $34.56 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Spring, Left Front ; Coil Spring; Coil Spring, Spring
- Position: Driver Side
Fits the following Acura Models:
- RDX 2013-2015
View related parts
Acura Front Coil Spring
Part Number: 51401-TGY-A01
$74.14 MSRP: $104.02
You Save: $29.88 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Spring, Front; Coil Spring, Spring
- Position: Front
Fits the following Acura Models:
- TLX 2021-2025
View related parts
Acura Front Coil Spring
Part Number: 51401-SJA-A62
$163.31 MSRP: $230.67
You Save: $67.36 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Spring, Front; Coil Spring, Spring
- Position: Driver Side
Fits the following Acura Models:
- RL 2009-2012
View related parts
Acura Rear Coil Spring
Part Number: 52441-TJC-A04
$47.29 MSRP: $65.95
You Save: $18.66 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Spring, Rear; Coil Spring, Spring
- Position: Rear
- Replaces: 52441-TJC-A03
Fits the following Acura Models:
- RDX 2019-2023
View related parts
Acura Rear Left Coil Spring
Part Number: 52446-TYC-A01
$57.62 MSRP: $80.37
You Save: $22.75 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Spring, Rear L; Coil Spring, Spring
- Position: Driver Side
Fits the following Acura Models:
- MDX 2022-2026
View related parts
Acura Spring Left Front
Part Number: 51406-TZ7-A02
$77.47 MSRP: $108.68
You Save: $31.21 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Coil Spring; Spring
- Position: Driver Side
- Replaces: 51406-TZ7-A01
Fits the following Acura Models:
- TLX 2015-2020
View related parts
Acura Front Coil Spring
Part Number: 51401-S6M-A52
Product Specifications
- Other Name: Spring, Front; Coil Spring, Spring
- Position: Front
- Replaces: 51401-S6M-306, 51401-S6M-A51
Fits the following Acura Models:
- RSX 2005-2006
View related parts
Acura Rear Coil Spring
Part Number: 52441-SJA-A61
Product Specifications
- Other Name: Spring, Rear; Coil Spring, Spring
- Position: Rear
Fits the following Acura Models:
- RL 2009-2012

| Page 1 of 14 |Next >

1-20 of 277 Results

Acura Coil Springs Parts Questions & Experts Answers

Rear (Mitsubishi) Spring
52441-SR3-A05
Q: How to Remove the Coil Springs and Shock Absorber Assembly from the Rear of an Acura Integra?
A:
Loosen lug nuts, lift vehicle, and remove rear wheels. Support trailing arm with a jack, remove damper cover and shock absorber mounting nuts. Remove lower shock absorber bolt, lower jack and arm, and remove shock absorber/spring assembly. Installation is reverse of removal. Before tightening lower bolt, raise trailing arm to simulate ride height and tighten all fasteners.
Front Spring
51401-SEP-A15
Q: What Should You Consider Before Starting Work on Coil Springs and Shock Absorber on Acura TL?
A:
If the shocks or coil springs show signs of wear such as leaking fluid, loss of damping capability, or physical damage like chips, sagging, or cracks, consider all options before starting any work. The shock absorbers or coil springs cannot be serviced individually and must be replaced if issues arise, although complete assemblies may be available on an exchange basis, saving time and effort. Before disassembling the vehicle, check the cost and availability of parts. Begin by removing the shock absorber/coil spring assembly, working on one assembly at a time to avoid mixing parts. Mount the assembly in a vise, using wood or rags to protect it, and avoid over-tightening. Install the spring compressor according to the manufacturer's instructions, compressing the spring enough to relieve pressure from the upper spring seat, which can be confirmed by wiggling the spring. Mark the orientation of the upper mount relative to the spring or damper unit for proper reinstallation. Use an Allen wrench to hold the shock damper rod while unscrewing the self-locking retaining nut with a box-end wrench. Disassemble the parts in the order they are removed. For reassembly, carefully place the spring onto the shock absorber body, ensuring it rests in the lowest part of the seat, use a new self-locking nut, and tighten it to the specified torque. Before releasing the spring compressor, ensure the upper mount is oriented as it was originally. Once the spring compressor is removed, the assembly is ready for installation.

Related Acura Parts

Browse by Model

ADX Coil Springs CL Coil Springs ILX Coil Springs ILX Hybrid Coil Springs Integra Coil Springs Legend Coil Springs MDX Coil Springs NSX Coil Springs RDX Coil Springs RL Coil Springs RLX Coil Springs RSX Coil Springs TL Coil Springs TLX Coil Springs TSX Coil Springs Vigor Coil Springs ZDX Coil Springs