My Garage
Cart

Genuine Acura Legend Turn Signal Flasher

Turn Signal Indicator Flasher
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Turn Signal Flashers found

Acura Legend Turn Signal Flasher

The Acura Legend Turn Signal Flasher controls the rhythmic blinking of the car's indicator lamps, allowing clear lane changes and emergency warnings to the rest of the traffic around the car. Housed with the fuses, this Turn Signal Flasher gets current as soon as the steering stalk moves and then runs the bulbs on and off to produce the familiar blink. Early Legend models were based on a thermal Turn Signal Flasher that heats a spring steel strip, bending it to close the circuit, cools, and bends back open in rapid loops, which provides both light pulses and the clicking sound. As the Acura Legend line adopted more electronics and optional LED lamps, later cars switched to a solid-state Turn Signal Flasher and applied transistors and a timing chip to imitate the same cadence but without making use of the heat. The chief difference is in the way that each style creates the on-off pattern, with thermal units relying on metal expansion and electronic units using digital timing, although both types plug into the same slot for easy replacement. Matching flasher style to bulb type makes every Acura Turn Signal Flasher function steadily and reliably.

We provide a broad range of OEM Acura Legend Turn Signal Flasher at unbeatable prices on our website. For your OEM parts, You can count on the guaranteed quality, manufacturer's warranty, outstanding customer service, and prompt delivery. We look forward to your visit.

Acura Legend Turn Signal Flasher Parts Questions & Experts Answers

  • Q: What is the Role and Troubleshooting Process for the Turn Signal Flasher on an Acura Legend?
    A:
    Interior Fuse block is where the hazard/turn signal flasher is--the small canister shape unit. Operated properly an audible click can be heard. A faulty turn-signal bulb is indicated if the turn signals fail on one side and the turn signal flasher unit does not click. If no blink from both turn signals, fuse blown, fault flasher, bad switch or loose connection. If you have a blown turn signal fuse you can quickly check the fuse box and check the wiring for a short before installing another fuse. You will need to remove the flasher from the fuse block or wiring harness, and that's where you'll want to make sure the new unit is the same as the old, by comparing what you take out with what you put in. Once removed, installation is done in the reverse.

Related Acura Legend Parts