How to remove and install a Fuel Tank in an Acura MDX?

Remove the fuel tank filler cap to relieve the fuel tank pressure. Relieve the fuel system pressure. Disconnect the cable from the negative battery terminal. Disconnect the electrical connector from the fuel pump/fuel level sending unit module. If the fuel tank is empty or nearly empty, it's not necessary to siphon the remaining fuel from the tank. But if there is a lot of fuel in the tank, remove the fuel pump/fuel level sending unit and siphon out the remaining fuel through the fuel pump mounting hole in the tank. Raise the vehicle and place it securely on jackstands. Remove the rear part of the exhaust system. On 4WD models, remove the driveshaft. Remove the fuel tank rock guard mounting bolts ornuts and remove the rock guard. On 2001 and 2002 Acura and 2003 and 2004 Honda models, disconnect the quick-connect fittings for the fuel supply and return lines. Be sure to cover the ends of the fuel line fitting(s) with plastic bags to prevent dirt and moisture from contaminating the fuel system. On 2003 and later Acura and 2005 and later Honda models disconnect the fuel supply line quick-connect fitting. Disconnect the EVAP hose that connects the fuel tank to the EVAP canister. Disconnect the fuel filler neck hose. Disconnect the EVAP hose located above the filler neck hose. Support the fuel tank. Remove the fuel tank retaining strap bolts and remove the straps. Carefully lower the fuel tank. If you're cleaning the fuel tank, this would be a good time to inspect and clean the inlet strainer for the fuel pump/fuel level sending unit module. Installation is the reverse of removal. Be sure to tighten the fuel tank strap bolts securely. When you're done, reconnect the cable to the negative battery terminal, then start the engine and check for fuel leaks.

Genuine Acura MDX Fuel Tank

Gas Tank

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

13 Fuel Tanks found

View related parts
Acura MDX Set, Fuel Tank Component
Part Number: 17044-TYA-A05
$856.48 MSRP: $1223.20
You Save: $366.72 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Fuel Tank
- Replaces: 17044-TYA-A04
- Warranty: This genuine part is guaranteed by Acura's factory warranty.
View related parts
Acura MDX Fuel Tank Set
Part Number: 17044-TRX-A00
$2017.58 MSRP: $2881.43
You Save: $863.85 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Tank Set, Fuel; Fuel Tank
- Warranty: This genuine part is guaranteed by Acura's factory warranty.
View related parts
Acura MDX Fuel Tank Set
Part Number: 17044-SZN-A01
$1333.54 MSRP: $1904.52
You Save: $570.98 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Fuel Tank
- Warranty: This genuine part is guaranteed by Acura's factory warranty.
View related parts
Acura MDX Fuel Tank Set
Part Number: 17044-SZN-A00
$1333.54 MSRP: $1904.52
You Save: $570.98 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Fuel Tank
- Warranty: This genuine part is guaranteed by Acura's factory warranty.
View related parts
Acura MDX Fuel Tank Set
Part Number: 17044-TG7-A00
$959.30 MSRP: $1370.03
You Save: $410.73 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Fuel Tank
- Warranty: This genuine part is guaranteed by Acura's factory warranty.
View related parts
Acura MDX Fuel Tank Set
Part Number: 17044-TYB-A03
$850.30 MSRP: $1214.37
You Save: $364.07 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: TANK SET, FUEL; Fuel Tank
- Warranty: This genuine part is guaranteed by Acura's factory warranty.
View related parts
Acura MDX Fuel Gas Tank
Part Number: 17044-STX-A00
$980.74 MSRP: $1400.65
You Save: $419.91 (30%)
Product Specifications
- Other Name: Tank Set, Fuel; Fuel Tank
- Warranty: This genuine part is guaranteed by Acura's factory warranty.
View related parts
Acura MDX Fuel Tank Set
Part Number: 17044-TZ5-A00
$1605.56 MSRP: $2292.99
You Save: $687.43 (30%)
Product Specifications
- Other Name: Fuel Tank
- Warranty: This genuine part is guaranteed by Acura's factory warranty.
View related parts
Acura MDX Fuel Tank Set
Part Number: 17044-TG7-A01
$959.30 MSRP: $1370.03
You Save: $410.73 (30%)
Product Specifications
- Other Name: TANK SET, FUEL; Fuel Tank
- Warranty: This genuine part is guaranteed by Acura's factory warranty.
View related parts
Acura MDX Fuel Tank Set
Part Number: 17044-SZA-A12
$1349.02 MSRP: $1926.61
You Save: $577.59 (30%)
Product Specifications
- Other Name: Fuel Tank
- Replaces: 17044-SZA-A11, 17044-STX-A01, 17044-SZA-A00, 17044-SZA-A10, 17044-SZA-A01
- Warranty: This genuine part is guaranteed by Acura's factory warranty.
View related parts
Acura MDX Fuel Tank Set
Part Number: 17044-TZ5-A01
$1605.56 MSRP: $2292.99
You Save: $687.43 (30%)
Product Specifications
- Other Name: TANK SET, FUEL; Fuel Tank
- Warranty: This genuine part is guaranteed by Acura's factory warranty.
View related parts
Acura MDX Fuel Tank
Part Number: 17500-S9V-A01
Product Specifications
- Warranty: This genuine part is guaranteed by Acura's factory warranty.
View related parts
Acura MDX Fuel Tank
Part Number: 17500-S3V-A12
Product Specifications
- Replaces: 17500-S3V-A01, 17500-S3V-A11, 17500-S3V-A02
- Warranty: This genuine part is guaranteed by Acura's factory warranty.

Acura MDX Fuel Tank

The Acura MDX Fuel Tank serves as a secure reservoir that stores gasoline and vapors while supplying the engine with steady fuel through its in tank pump. Across Acura model years the MDX platform keeps the sender unit inside so drivers always see accurate level readings. Inside, baffles keep liquid from sloshing so the pickup stays covered during quick turns and stops, and the enclosure forms a vital part of the EVAP system that traps fumes instead of letting them escape. Over the years the SUV has applied two main Fuel Tank styles, stamped and welded steel and blow molded HDPE plastic, both factory leak tested for safety. The metal Fuel Tank resists impact but can corrode inside and out when exposed to water or road salt, while the lighter plastic Fuel Tank cannot rust yet may crack under extreme heat, cold, or debris strikes. Each Fuel Tank is mounted under the body with dedicated straps that face the same harsh environment. Acura engineers chose designs that balance strength, weight, and emission control, meaning every Acura MDX today benefits from reliable range and reduced vapor loss compared with earlier MDX models.

We provide a broad range of OEM Acura MDX Fuel Tank at unbeatable prices on our website. For your OEM parts, You can count on the guaranteed quality, manufacturer's warranty, outstanding customer service, and prompt delivery. We look forward to your visit.

Acura MDX Fuel Tank Parts Questions & Experts Answers

Fuel Gas Tank
17044-STX-A00
Q: How to remove and install a Fuel Tank in an Acura MDX?
A:
Remove the fuel tank filler cap to relieve the fuel tank pressure. Relieve the fuel system pressure. Disconnect the cable from the negative battery terminal. Disconnect the electrical connector from the Fuel Pump/fuel level sending unit module. If the fuel tank is empty or nearly empty, it's not necessary to siphon the remaining fuel from the tank. But if there is a lot of fuel in the tank, remove the fuel pump/fuel level sending unit and siphon out the remaining fuel through the fuel pump mounting hole in the tank. Raise the vehicle and place it securely on jackstands. Remove the rear part of the exhaust system. On 4WD models, remove the driveshaft. Remove the fuel tank rock guard mounting bolts ornuts and remove the rock guard. On 2001 and 2002 Acura and 2003 and 2004 Honda models, disconnect the quick-connect fittings for the fuel supply and return lines. Be sure to cover the ends of the fuel line fitting(s) with plastic bags to prevent dirt and moisture from contaminating the fuel system. On 2003 and later Acura and 2005 and later Honda models disconnect the fuel supply line quick-connect fitting. Disconnect the EVAP hose that connects the fuel tank to the EVAP canister. Disconnect the fuel filler neck hose. Disconnect the EVAP hose located above the filler neck hose. Support the fuel tank. Remove the fuel tank retaining strap bolts and remove the straps. Carefully lower the fuel tank. If you're cleaning the fuel tank, this would be a good time to inspect and clean the inlet strainer for the fuel pump/fuel level sending unit module. Installation is the reverse of removal. Be sure to tighten the fuel tank strap bolts securely. When you're done, reconnect the cable to the negative battery terminal, then start the engine and check for fuel leaks.