Wear gloves when working inside the door openings to protect against cuts from sharp metal edges. Remove the
Door Trim Panel and the plastic watershield. Raise the window glass just enough to access the two bolts that secure the bottom edge of the window glass, then remove the bolts. Carefully lift up and remove the glass through the window slot, ensuring not to drop it inside the door. Installation is the reverse of removal; make sure that when the window is closed, there's no clearance between the glass and the glass run channel. If the window is misaligned, loosen the two window glass retaining bolts and push the window back toward the trailing edge of the door until it's fully seated in the run channel, then tighten the window retaining bolts securely. When finished, reset the power window control unit.