How to disconnect and install the Brake Light Switch on an Acura TL?

Take the electrical connector off of the brake light switch, then turn the switch a tiny bit counterclockwise to remove it from it's holder, and pull it out. First, insert the switch into the holder, then push until the switch body contacts the rubber stop on the brake pedal bracket, rotate the switch 45 degrees clockwise so the switch will lock into place automatically, at the same time it will reach proper clearance to the rubber stop. Place the vehicle in normal service only after plug in the electrical socket of the switch and then confirm that the brake lights work well.

Genuine Acura TL Brake Light Switch

Brake Lamp Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Brake Light Switches found

View related parts
Acura TL Stop And Crui Switch Assembly
Part Number: 36750-SEA-003
$84.73 MSRP: $118.87
You Save: $34.14 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch Assembly, Stop&Crui ; Brake Pedal Switch; Brake Pedal Switch, Stoplamp Switch
- Replaces: 36750-S84-003
- Warranty: This genuine part is guaranteed by Acura's factory warranty.
View related parts
Acura TL Stop & Cruise Switch Assembly
Part Number: 36750-TR2-A01
$75.39 MSRP: $105.77
You Save: $30.38 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch, Stop & Cruise ; Stoplamp Switch; Stoplamp Switch
- Warranty: This genuine part is guaranteed by Acura's factory warranty.
View related parts
Acura TL Stop And Cruise Control Switch Assembly
Part Number: 36750-SJA-013
$18.16 MSRP: $25.33
You Save: $7.17 (29%)
Product Specifications
- Other Name: Switch Assembly, Stop & Cruise (Matsushita) ; Stoplamp Switch; Release Switch, Stoplamp Switch
- Replaces: 36750-SJA-003
- Warranty: This genuine part is guaranteed by Acura's factory warranty.
View related parts
Acura TL Stop And Cruise Control Switch Assembly
Part Number: 36750-SR3-003
Product Specifications
- Other Name: Switch Assembly, Stop & Cruise ; Brake Pedal Switch; Brake Pedal Switch, Brake Switch, Stoplamp Switch
- Warranty: This genuine part is guaranteed by Acura's factory warranty.

Acura TL Brake Light Switch

The Acura TL Brake Light Switch is the important switch that activates the rear stop lamps whenever the driver presses the pedal. Mounted under the dash on a bracket aligned with the brake pedal arm, this Brake Light Switch completes an electrical circuit the instant the pedal moves, immediately notifying the traffic coming up behind the Acura that it is being slowed down. Throughout successive TL generations, the basic design stayed consistent, relying on the simple plunger style Brake Light Switch, which is pressed in while the pedal rests and is released to send power to the bulbs, so drivers do not have to worry about complicated electronics. Variations have been minimal, confined largely to minor connector or bracket shapes required by model-year updates, but all versions of the Acura still retain the same fast-acting mechanical contact principle. Because the TL has this simple design, diagnosis involves simply ensuring that the Brake Light Switch plunger touches the pedal and that the wiring is intact. Should replacement be required, swapping in a new Brake Light Switch restores full warning capability and preserves that predictable braking communication other motorists rely on. In every Acura TL, this simplicity facilitates fast troubleshooting.

We provide a broad range of OEM Acura TL Brake Light Switch at unbeatable prices on our website. For your OEM parts, You can count on the guaranteed quality, manufacturer's warranty, outstanding customer service, and prompt delivery. We look forward to your visit.

Acura TL Brake Light Switch Parts Questions & Experts Answers

Stop And Crui Switch Assembly
36750-SEA-003
Q: How to disconnect and install the Brake Light Switch on an Acura TL?
A:
Take the electrical connector off of the brake light switch, then turn the switch a tiny bit counterclockwise to remove it from it's holder, and pull it out. First, insert the switch into the holder, then push until the switch body contacts the rubber stop on the brake pedal bracket, rotate the switch 45 degrees clockwise so the switch will lock into place automatically, at the same time it will reach proper clearance to the rubber stop. Place the vehicle in normal service only after plug in the electrical socket of the switch and then confirm that the brake lights work well.