How to inspect and replace flexible brake hoses and Brake Line in a Acura MDX?

About every six months, the vehicle should be raised and placed securely on jackstands to inspect the flexible hoses which connect the steel brake lines with the front and rear brake assemblies. These hoses should be checked for cracks, chafing of the outer cover, leaks, blisters and other damage. A light and mirror will be needed for a thorough check. If a hose exhibits any of the above defects, replace it with a new one. To replace a hose, first clean all dirt away from the ends of the hose. Then, disconnect the brake hose from the brake line by unscrewing the brake line threaded fitting with a flare-nut wrench to protect the fitting corners from being rounded off, then pull off the U-clip. Disconnect the hose from the caliper, discarding the sealing washers on either side of the fitting. Using new sealing washers, attach the new brake hose to the caliper. To reattach a brake hose to the metal line, insert the end of the hose through the frame bracket, make sure the hose isn't twisted, then attach the metal line by tightening the tube nut fitting securely. Install the U-clip at the frame bracket. Carefully check to make sure the suspension or steering components don't make contact with the hose. Have an assistant push down on the vehicle and also turn the steering wheel lock-to-lock during inspection. Bleed the brake system. When replacing brake lines, be sure to use the correct parts. Don't use copper tubing for any brake system components. Purchase steel brake lines from a dealer parts department or auto parts store. Prefabricated brake line, with the tube ends already flared and fittings installed, is available at auto parts stores and dealer parts departments. These lines can be bent to the proper shapes using a tubing bender. When installing the new line, make sure it's well supported in the brackets and has plenty of clearance between moving or hot components. After installation check the master cylinder fluid level and add fluid as necessary. Bleed the brake system and test the brakes carefully before placing the vehicle into normal operation.

Genuine Acura MDX Brake Line

Brake Hose

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

44 Brake Lines found

View related parts
Acura MDX Rear Brake Hose Set
Part Number: 01468-TZ5-A10
$63.18 MSRP: $88.12
You Save: $24.94 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Set, Rear Brake Hose ; Flex Hose; Brake Hose, Flex Hose
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Acura's factory warranty.
View related parts
Acura MDX Front Brake Hose
Part Number: 01464-S3V-A10
$44.59 MSRP: $62.18
You Save: $17.59 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose Set, Front Brake; Brake Hose, Flex Hose
- Position: Front
- Warranty: This genuine part is guaranteed by Acura's factory warranty.
View related parts
Acura MDX Set, Rear Brake Hose
Part Number: 01466-TZ5-A10
$61.59 MSRP: $85.90
You Save: $24.31 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Flex Hose; Brake Hose
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Acura's factory warranty.
View related parts
Acura MDX Hose Set, Right Front
Part Number: 01464-TYA-A00
$23.40 MSRP: $32.63
You Save: $9.23 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Brake Hose, Flex Hose
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Acura's factory warranty.
View related parts
Acura MDX Front Brake Hose Set
Part Number: 01465-TZ5-A01
$31.15 MSRP: $43.45
You Save: $12.30 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Set,Front Brake Hose; Brake Hose, Flex Hose
- Position: Driver Side
- Replaces: 01465-TZ5-A00
- Warranty: This genuine part is guaranteed by Acura's factory warranty.
View related parts
Acura MDX Hose Set, Rear Brake
Part Number: 01466-TYA-A02
$21.64 MSRP: $30.18
You Save: $8.54 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Position: Rear
- Warranty: This genuine part is guaranteed by Acura's factory warranty.
View related parts
Acura MDX Hose Set, Left Front
Part Number: 01465-TYA-A00
$23.40 MSRP: $32.63
You Save: $9.23 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Brake Hose, Flex Hose
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Acura's factory warranty.
View related parts
Acura MDX Hose Set, Right Rear
Part Number: 01466-TYA-A11
$25.10 MSRP: $35.00
You Save: $9.90 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Position: Rear Passenger Side
- Warranty: This genuine part is guaranteed by Acura's factory warranty.
View related parts
Acura MDX Right Front Hose Set
Part Number: 01464-TZ5-A01
$31.15 MSRP: $43.45
You Save: $12.30 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose Set, Right Front ; Brake Hose; Brake Hose, Flex Hose
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Acura's factory warranty.
View related parts
Acura MDX Hose Set, Left Rear
Part Number: 01468-TYA-A11
$25.10 MSRP: $35.00
You Save: $9.90 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Position: Rear Driver Side
- Warranty: This genuine part is guaranteed by Acura's factory warranty.
View related parts
Acura MDX Hose Set, Left Rear
Part Number: 01468-TZ5-A01
$36.56 MSRP: $50.98
You Save: $14.42 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Brake Hose; Flex Hose
- Position: Driver Side
- Replaces: 01468-TZ5-A00
- Warranty: This genuine part is guaranteed by Acura's factory warranty.
View related parts
Acura MDX Pilot Rear Brake Flex Hose
Part Number: 01466-S3V-A00
$49.09 MSRP: $68.47
You Save: $19.38 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose Set, Rear Brake; Brake Hose, Flex Hose
- Position: Rear
- Warranty: This genuine part is guaranteed by Acura's factory warranty.
View related parts
Acura MDX Pipe E Component, Braker
Part Number: 46331-TYA-A02
$12.71 MSRP: $17.73
You Save: $5.02 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pipe E Component , Braker
- Warranty: This genuine part is guaranteed by Acura's factory warranty.
View related parts
Acura MDX Left Rear Brake Hose Set (B)
Part Number: 01468-STX-A00
$56.99 MSRP: $79.48
You Save: $22.49 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose Set, Left Rear Brake (B); Brake Hose, Flex Hose
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Acura's factory warranty.
View related parts
Acura MDX Hose Set, Right Front
Part Number: 01464-TZ5-A00
$31.15 MSRP: $43.45
You Save: $12.30 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Brake Hose
- Position: Front Passenger Side
- Warranty: This genuine part is guaranteed by Acura's factory warranty.
View related parts
Acura MDX Pipe D Component, Brake
Part Number: 46340-TYA-A02
$106.62 MSRP: $150.60
You Save: $43.98 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pipe D Component , Brake
- Warranty: This genuine part is guaranteed by Acura's factory warranty.
View related parts
Acura MDX Pipe W Component, Brake
Part Number: 46376-TYA-A01
$8.02 MSRP: $11.18
You Save: $3.16 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pipe W Component , Brake
- Warranty: This genuine part is guaranteed by Acura's factory warranty.
View related parts
Acura MDX Pipe X Component, Brake
Part Number: 46377-TYA-A01
$10.35 MSRP: $14.43
You Save: $4.08 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pipe X Component , Brake
- Warranty: This genuine part is guaranteed by Acura's factory warranty.
View related parts
Acura MDX Pipe U Component, Brake
Part Number: 46374-TYA-A01
$11.10 MSRP: $15.48
You Save: $4.38 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pipe U Component , Brake
- Warranty: This genuine part is guaranteed by Acura's factory warranty.
View related parts
Acura MDX Pipe V Component, Brake
Part Number: 46375-TYA-A01
$11.13 MSRP: $15.52
You Save: $4.39 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pipe V Component , Brake
- Warranty: This genuine part is guaranteed by Acura's factory warranty.

| Page 1 of 3 |Next >

1-20 of 44 Results

Acura MDX Brake Line

The Acura MDX Brake Line plays an important role in the hydraulic brake system of the Acura MDX auto by providing the proper connection of the brake fluid from the master cylinder to the brake caliper pistons. Being one of the key components of the, the Acura MDX Brake Line is famous for its dependability and effectiveness, so it significantly contributes to the vehicle's safety and performance features. Suitable for all the four generations of the MDX models, Brake Line is equally built to last through rough traffic features such as harsh road surfaces, aggressive handling among other factors that cause wear and tear, and corrosive elements that can affect Brake Lines. Prebent Brake Line kits are manufactured with corrosion-resistant stainless steel which makes them durable, long lasting and precise to direct replacement brake hoses which are made to meet the original fitment measurements. However, the availability to enhance the hoses to the braided stainless steel one makes the brake pedal even firmer and more sensitive that extends the joy of driving. The Acura MDX remains to epitomize luxury as well as the spirit of innovation with its build quality and the Brake Line system does not fall short of this idea. Thus, functional and exceptional in safety and performance, the Acura MDX Brake Line makes an impression in the automotive industry for the luxury SUV of the MDX. Be it in-city or inter-city, travelling is much safer, comfortable and confidence inspiring, thanks to the quality Acura Brake Line.

We provide a broad range of OEM Acura MDX Brake Line at unbeatable prices on our website. For your OEM parts, You can count on the guaranteed quality, manufacturer's warranty, outstanding customer service, and prompt delivery. We look forward to your visit.

Acura MDX Brake Line Parts Questions & Experts Answers

Front Brake Hose
01464-S3V-A10
Q: How to inspect and replace flexible brake hoses and Brake Line in a Acura MDX?
A:
About every six months, the vehicle should be raised and placed securely on jackstands to inspect the flexible hoses which connect the steel brake lines with the front and rear brake assemblies. These hoses should be checked for cracks, chafing of the outer cover, leaks, blisters and other damage. A light and mirror will be needed for a thorough check. If a hose exhibits any of the above defects, replace it with a new one. To replace a hose, first clean all dirt away from the ends of the hose. Then, disconnect the brake hose from the brake line by unscrewing the brake line threaded fitting with a flare-nut wrench to protect the fitting corners from being rounded off, then pull off the U-clip. Disconnect the hose from the caliper, discarding the sealing washers on either side of the fitting. Using new sealing washers, attach the new brake hose to the caliper. To reattach a brake hose to the metal line, insert the end of the hose through the frame bracket, make sure the hose isn't twisted, then attach the metal line by tightening the tube nut fitting securely. Install the U-clip at the frame bracket. Carefully check to make sure the suspension or steering components don't make contact with the hose. Have an assistant push down on the vehicle and also turn the steering wheel lock-to-lock during inspection. Bleed the brake system. When replacing brake lines, be sure to use the correct parts. Don't use copper tubing for any brake system components. Purchase steel brake lines from a dealer parts department or auto parts store. Prefabricated brake line, with the tube ends already flared and fittings installed, is available at auto parts stores and dealer parts departments. These lines can be bent to the proper shapes using a tubing bender. When installing the new line, make sure it's well supported in the brackets and has plenty of clearance between moving or hot components. After installation check the master cylinder fluid level and add fluid as necessary. Bleed the brake system and test the brakes carefully before placing the vehicle into normal operation.