How to Replace Front Brake Pad Set on Acura MDX?

This procedure applies to both front and rear disc brakes. Begin by removing the cap from the brake fluid reservoir. Loosen the wheel lug nuts, raise the front or rear of the vehicle, support it on jackstands, and block the wheels at the opposite end. Take off the wheels and work on one brake assembly at a time, using the other assembled brake for reference. Inspect the brake disc carefully, and if machining is necessary, remove the disc and subsequently the pads. Push the piston back into its bore using a C-clamp, ensuring that the fluid in the master cylinder doesn't overflow; if it looks like it might, remove some of the fluid. Before proceeding, clean the brake assembly with brake cleaner, letting it dry and placing a drain pan underneath to catch any residue; avoid using compressed air. Detach the caliper by removing the lower bolt, and for full detachment, both bolts; ensure the caliper doesn't hang by the brake hose. Secure it with a wire, then remove the inner and outer pads and shims, noting the position of any metal wear indicators. Take off the shim(s) from each pad, noting their order and position. Apply disc brake grease between the shim(s) and the back of each brake pad. Replace the shims on the pads in their original order and position. Remove and check the fit of the upper and lower pad support plates, replacing them if necessary. Clean the upper and lower sliding pins, grease them with high-temperature grease, and put them back, ensuring the pin boots aren't damaged. Reinstall the inner and outer pads, ensuring they're seated correctly on the support plates and any wear indicators are in the original positions. Reposition the caliper over the pads, secure it with the bolts, and tighten them. Once completed, depress the brake pedal a few times to adjust the pads with the disc. Lastly, check the brake fluid level and adjust if needed, and test the brakes before returning the vehicle to normal use.

Genuine Acura MDX Brake Pad Set

Disc Brake Pad Set

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

18 Brake Pad Sets found

View related parts
Acura MDX Front Disc Brake Pad Set
Part Number: 45022-TZ5-A01
$79.75 MSRP: $111.88
You Save: $32.13 (29%)
ADD TO CART
Product Specifications
- Other Name: Front Brake Pad Set; Brake Pad, Front Pad
- Position: Front
- Replaced by: 45022-TZ5-A02
- Warranty: This genuine part is guaranteed by Acura's factory warranty.
View related parts
Acura MDX Front Disc Brake Pad Set
Part Number: 45022-STX-A00
$83.97 MSRP: $117.80
You Save: $33.83 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Front Brake Pad Set
- Position: Front
- Warranty: This genuine part is guaranteed by Acura's factory warranty.
View related parts
Acura MDX Rear Disc Brake pad Set
Part Number: 43022-STX-A01
$67.17 MSRP: $93.68
You Save: $26.51 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Rear Brake Pad Set
- Position: Rear
- Replaces: 43022-STX-A00
- Warranty: This genuine part is guaranteed by Acura's factory warranty.
View related parts
Acura MDX Rear Disc Brake pads (Axs38)
Part Number: 43022-S3V-A12
$67.17 MSRP: $93.68
You Save: $26.51 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Rear Pad Set; Brake Pad, Rear Pad
- Position: Rear
- Replaces: 43022-S3V-A11, 43022-S3V-A10
- Warranty: This genuine part is guaranteed by Acura's factory warranty.
View related parts
Acura MDX Front Disc Brake Pad Set
Part Number: 45022-STX-A01
$83.97 MSRP: $117.80
You Save: $33.83 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Front Pad Set
- Position: Front
- Warranty: This genuine part is guaranteed by Acura's factory warranty.
View related parts
Acura MDX Disc Disc Brake pad
Part Number: 45022-TZ5-A00
$79.75 MSRP: $111.88
You Save: $32.13 (29%)
ADD TO CART
Product Specifications
- Other Name: Front Pad Set
- Replaced by: 45022-TZ5-A02
- Warranty: This genuine part is guaranteed by Acura's factory warranty.
View related parts
Acura MDX Front Disc Brake pad Set (64Mm)
Part Number: 45022-S3V-A01
$83.97 MSRP: $117.80
You Save: $33.83 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Front Pad Set (64MM); Brake Pad, Front Pad
- Position: Front
- Warranty: This genuine part is guaranteed by Acura's factory warranty.
View related parts
Acura MDX Front Disc Brake pad Set (64Mm, Ns217)
Part Number: 45022-S3V-A00
$83.97 MSRP: $117.80
You Save: $33.83 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Front Pad Set (64MM, Ns217)
- Position: Front
- Warranty: This genuine part is guaranteed by Acura's factory warranty.
View related parts
Acura MDX Front Pad Set
Part Number: 45022-TYA-A01
$98.38 MSRP: $138.02
You Save: $39.64 (29%)
ADD TO CART
Product Specifications
- Other Name: Set, Front Pad; Brake Pad, Front Pad
- Position: Front
- Replaces: 45022-TYA-A00
- Warranty: This genuine part is guaranteed by Acura's factory warranty.
View related parts
Acura MDX Rear Disc Brake pad Set
Part Number: 43022-TZ5-A01
$74.65 MSRP: $104.73
You Save: $30.08 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Rear Pad Set; Brake Pad, Rear Pad
- Position: Rear
- Replaces: 43022-TZ5-A00
- Warranty: This genuine part is guaranteed by Acura's factory warranty.
View related parts
Acura MDX Rear Disc Brake pad Set (Axs38)
Part Number: 43022-S3V-A03
$74.65 MSRP: $104.73
You Save: $30.08 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Rear Pad Set (Axs38)
- Position: Rear
- Warranty: This genuine part is guaranteed by Acura's factory warranty.
View related parts
Acura MDX Pad Set, Front
Part Number: 45022-TYB-A01
$98.38 MSRP: $138.02
You Save: $39.64 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: PAD SET, FR.; Brake Pad, Front Pad
- Position: Front
- Warranty: This genuine part is guaranteed by Acura's factory warranty.
View related parts
Acura MDX PAD SET, FR.
Part Number: 45022-TYA-A10
$98.38 MSRP: $138.02
You Save: $39.64 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Brake Pad
- Warranty: This genuine part is guaranteed by Acura's factory warranty.
View related parts
Acura MDX PAD SET, RR.
Part Number: 43022-TYA-A01
$71.29 MSRP: $100.02
You Save: $28.73 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Brake Pad, Rear Pad
- Warranty: This genuine part is guaranteed by Acura's factory warranty.
View related parts
Acura MDX Rear Pad Set
Part Number: 43022-TYA-A00
$71.29 MSRP: $100.02
You Save: $28.73 (29%)
Product Specifications
- Other Name: Set, Rear Pad
- Position: Rear
- Warranty: This genuine part is guaranteed by Acura's factory warranty.
View related parts
Acura MDX Front Disc Brake Pad Set
Part Number: 45022-TZ5-A10
$83.97 MSRP: $117.80
You Save: $33.83 (29%)
Product Specifications
- Other Name: Front Pad Set; Brake Pad, Front Pad
- Position: Front
- Warranty: This genuine part is guaranteed by Acura's factory warranty.
View related parts
Acura MDX Front Disc Brake pad Set (Ad45T)
Part Number: 45022-S3V-A12
$83.97 MSRP: $117.80
You Save: $33.83 (29%)
Product Specifications
- Other Name: Front Pad Set (Ad45T); Brake Pad, Front Pad
- Position: Front
- Replaces: 45022-S3V-A10, 45022-S3V-A11
- Warranty: This genuine part is guaranteed by Acura's factory warranty.
View related parts
Acura MDX Rear Disc Brake pad Set
Part Number: 43022-TZ5-A10
$76.03 MSRP: $106.67
You Save: $30.64 (29%)
Product Specifications
- Other Name: Rear Pad Set
- Position: Rear
- Warranty: This genuine part is guaranteed by Acura's factory warranty.

Acura MDX Brake Pad Set

The Acura MDX Brake Pad Set provides reliable stopping power by forcing friction material to press against the rotors. This rapidly converts motion to heat to stop the SUV safely. Each Acura Brake Pad Set has a steel backing plate that is bonded or riveted to a friction compound capable of withstanding everyday temperatures close to 400 degrees Fahrenheit and peaks significantly higher. Engineers designed pads for your average driver, so the Acura brakes are fine for commuting and errands but go into a fit of fade if you are going for a spirited run or carrying cargo. To accommodate diverse driving habits over the years the MDX was built, the company has offered different pad materials. Early non-metallic linings cut down rotor wear but lost durability under heat. Later semi-metallic formulas had metal fibers for better heat dissipation and bite. The ceramic style Brake Pad Set focuses on low dust and consistent performance, resisting high temperatures without the harsh feel of older mixes. Regardless of compound, integrated wear sensors or audible indicators alert MDX owners when thickness approaches the minimum, a call for fresh Brake Pad Set to ensure the Acura does not compromise in terms of deceleration. Regular checks near 50,000 miles ensure the next Brake Pad Set keeps the MDX secure.

We provide a broad range of OEM Acura MDX Brake Pad Set at unbeatable prices on our website. For your OEM parts, You can count on the guaranteed quality, manufacturer's warranty, outstanding customer service, and prompt delivery. We look forward to your visit.

Acura MDX Brake Pad Set Parts Questions & Experts Answers

Rear Disc Brake pads (Axs38)
43022-S3V-A12
Q: How to Replace Front Brake Pad Set on Acura MDX?
A:
This procedure applies to both front and rear disc brakes. Begin by removing the cap from the brake fluid reservoir. Loosen the wheel lug nuts, raise the front or rear of the vehicle, support it on jackstands, and block the wheels at the opposite end. Take off the wheels and work on one brake assembly at a time, using the other assembled brake for reference. Inspect the Brake Disc carefully, and if machining is necessary, remove the disc and subsequently the pads. Push the piston back into its bore using a C-clamp, ensuring that the fluid in the master cylinder doesn't overflow; if it looks like it might, remove some of the fluid. Before proceeding, clean the brake assembly with brake cleaner, letting it dry and placing a drain pan underneath to catch any residue; avoid using compressed air. Detach the caliper by removing the lower bolt, and for full detachment, both bolts; ensure the caliper doesn't hang by the brake hose. Secure it with a wire, then remove the inner and outer pads and shims, noting the position of any metal wear indicators. Take off the shim(s) from each pad, noting their order and position. Apply disc brake grease between the shim(s) and the back of each brake pad. Replace the shims on the pads in their original order and position. Remove and check the fit of the upper and lower pad support plates, replacing them if necessary. Clean the upper and lower sliding pins, grease them with high-temperature grease, and put them back, ensuring the pin boots aren't damaged. Reinstall the inner and outer pads, ensuring they're seated correctly on the support plates and any wear indicators are in the original positions. Reposition the caliper over the pads, secure it with the bolts, and tighten them. Once completed, depress the brake pedal a few times to adjust the pads with the disc. Lastly, check the brake fluid level and adjust if needed, and test the brakes before returning the vehicle to normal use.