How often should the Door Hinge, Door Latch Assembly, Door Lock, Hood Hinge, Hood Latch, Liftgate Hinge and Trunk Latch be lubricated on Acura Integra?

Every 3000 or 300,000 miles (whichever happens first) or once every three months, oil or lock lubricant should be applied as a few drops to the hinges and latch assemblies on the doors, hood, and trunk (or liftgate). Also, door latch strikers should be lubricated with a very thin coat of grease to minimize wear, so door latch strikers move freely. Spray the door and trunk (or liftgate) locks with spray on graphite lubricant.

Genuine Acura Integra Hood Latch

Engine Hood Latch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Hood Latches found

View related parts
Acura Integra Lock Assembly , Hood
Part Number: 74120-3S5-A01
$37.98 MSRP: $52.96
You Save: $14.98 (29%)
Product Specifications
- Other Name: LOCK ASSY., HOOD; Lock
- Warranty: This genuine part is guaranteed by Acura's factory warranty.
View related parts
Acura Integra Hood Lock Latch Assembly
Part Number: 74120-SK7-A02
Product Specifications
- Other Name: Lock Assembly, Hood
- Replaced by: 74120-SK7-013
- Warranty: This genuine part is guaranteed by Acura's factory warranty.
View related parts
Acura Integra Hood-Lock Latch
Part Number: 74120-ST7-A02
Product Specifications
- Other Name: Lock Assembly, Hood; Lock
- Replaces: 74120-ST7-A01
- Warranty: This genuine part is guaranteed by Acura's factory warranty.
View related parts
Acura Integra Hood Lock Assembly
Part Number: 74120-ST7-A01
Product Specifications
- Other Name: Lock Assembly, Hood
- Replaced by: 74120-ST7-A02
- Warranty: This genuine part is guaranteed by Acura's factory warranty.
View related parts
Acura Integra Hood Lock Assembly
Part Number: 63510-SD2-A02
Product Specifications
- Other Name: Lock Assembly, Hood; Lock
- Replaced by: 63510-SD2-A03
- Warranty: This genuine part is guaranteed by Acura's factory warranty.
View related parts
Acura Integra Hood Lock Assembly
Part Number: 63510-SD2-A01
Product Specifications
- Other Name: Lock Assembly, Hood
- Replaced by: 63510-SD2-A03
- Warranty: This genuine part is guaranteed by Acura's factory warranty.

Acura Integra Hood Latch

The Acura Integra Hood Latch is designed to hold the hood in place tightly and protect your important engine components from the weather and things on the road while you are driving. This compact Hood Latch assembly contains an internal release handle, a robust cable and a front catch that grips a steel striker so the hood does not come off until the driver pulls the handle and lifts the safety catch by hand. Beyond convenience for everyday life, the Hood Latch also serves as a theft deterrent by preventing quick access to coveted parts within the bay. Over the generations of the Hood Latch, there has been little change in the design which has remained familiar, but materials have evolved, progressing from all-steel units to steel mechanisms encased in reinforced plastic which resist cracking and corrosion and offer a longer service life without increasing weight. On select Acura Integra trims, some models install the primary Hood Latch coupled with an additional lockable catch using a plate tumbler sidebar or stainless shutter to give enthusiasts an additional security layer as well as prevent dirt intrusion. Routine inspection keeps the Acura system smooth, allowing any Integra owner to detect wear before a failure occurs. Genuine Acura parts are guaranteed to fit.

We provide a broad range of OEM Acura Integra Hood Latch at unbeatable prices on our website. For your OEM parts, You can count on the guaranteed quality, manufacturer's warranty, outstanding customer service, and prompt delivery. We look forward to your visit.

Acura Integra Hood Latch Parts Questions & Experts Answers

Hood-Lock Latch
74120-ST7-A02
Q: How often should the Door Hinge, Door Latch Assembly, Door Lock, Hood Hinge, Hood Latch, Liftgate Hinge and Trunk Latch be lubricated on Acura Integra?
A:
Every 3000 or 300,000 miles (whichever happens first) or once every three months, oil or lock lubricant should be applied as a few drops to the hinges and latch assemblies on the doors, Hood, and trunk (or liftgate). Also, door latch strikers should be lubricated with a very thin coat of grease to minimize wear, so door latch strikers move freely. Spray the door and trunk (or liftgate) locks with spray on graphite lubricant.