How to replace Cruise Control Switch, Hazard Warning Switch and Headlight Switch on Acura MDX?

You must remove the driver's switch panel in Pilot and MDX models to replace the Vehicle Stability Assist (VSA) OFF switch, cruise control, interior lighting and moonroof switches. Start by prying off the switch trim panel with a removal tool made for this task or a screwdriver. Then gently pull the panel out, disconnect the electrical cables by pressing the release on each cable. Slide the panel's locking tabs to open it, then push the switch you want to remove forward from the front of the control panel. Installation goes the other way. Inside the radio trim panel on 2006 and newer models, the hazard switch has a light bulb you can unscrew and replace. Start by wiggling the trim panel off using a trim panel removal tool, then take it out. To disconnect the electrical wires, press the release button to unlock them. To take a switch from the radio trim panel, lift the two small locking tabs and pull out the switch from its front position. Installation is done through the opposite steps.

Genuine Acura MDX Headlight Switch

Headlamp Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

9 Headlight Switches found

View related parts
Acura MDX Switch Assembly
Part Number: 35255-TZ5-K41
$55.88 MSRP: $77.93
You Save: $22.05 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Multifunction Switch; Headlamp Switch, Signal Switch
- Warranty: This genuine part is guaranteed by Acura's factory warranty.
View related parts
Acura MDX Combination Switch
Part Number: 35255-S3V-A02
$83.31 MSRP: $116.88
You Save: $33.57 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch Assembly, Lighting ; Headlamp Switch; Headlamp Switch, Signal Switch
- Warranty: This genuine part is guaranteed by Acura's factory warranty.
View related parts
Acura MDX Switch, Lighting&Turn
Part Number: 35255-TJB-D11
$43.19 MSRP: $60.23
You Save: $17.04 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Warranty: This genuine part is guaranteed by Acura's factory warranty.
View related parts
Acura MDX Switch, Lighting&Turn
Part Number: 35255-TJB-L11
$43.62 MSRP: $60.83
You Save: $17.21 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Warranty: This genuine part is guaranteed by Acura's factory warranty.
View related parts
Acura MDX SW, LIGHTING&TURN
Part Number: 35255-TYB-T11
$29.50 MSRP: $41.15
You Save: $11.65 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Signal Switch, Turn Signal Switch
- Warranty: This genuine part is guaranteed by Acura's factory warranty.
View related parts
Acura MDX Headlight Head Light Lamp Turn Combo Switch
Part Number: 35255-STX-A03
Product Specifications
- Other Name: Switch Assembly, Lighting & Turn ; Headlamp Switch; Headlamp Switch, Signal Switch
- Warranty: This genuine part is guaranteed by Acura's factory warranty.
View related parts
Acura MDX Turn Signal Blinker Light Lamp Switch
Part Number: 35255-STX-305
Product Specifications
- Other Name: Switch Assembly,Lighting& ; Headlamp Switch; Headlamp Switch, Signal Switch
- Replaces: 35255-STX-A01
- Warranty: This genuine part is guaranteed by Acura's factory warranty.
View related parts
Acura MDX Turn Light Switch Assembly
Part Number: 35255-TZ6-X41
$48.29 MSRP: $67.35
You Save: $19.06 (29%)
Product Specifications
- Other Name: Switch Assembly, Light Turn ; Multifunction Switch
- Warranty: This genuine part is guaranteed by Acura's factory warranty.
View related parts
Acura MDX Column Switch Headlamps Turn Signal
Part Number: 35255-S0K-A01
Product Specifications
- Other Name: Switch Assembly, Lighting; Headlamp Switch, Signal Switch
- Replaces: 35255-S3V-A01
- Warranty: This genuine part is guaranteed by Acura's factory warranty.

Acura MDX Headlight Switch

The Acura MDX Headlight Switch allows drivers to easily control their front lamps to provide more night safety and visibility. Mounted in an easily reachable position in the steering column, this Headlight Switch allows the operator to turn the lights on or off, switch between low and high beams, and adjust the brightness so the road signs or oncoming traffic are not obscured. Acura MDX generations past and present share the basic multi-position layout so that the owner gets familiar tactile clicks for each lighting mode rather than having to search through touchscreen menus. While some vehicles have separate knobs for dimming and beam selection, the model integrates everything into a single integrated Headlight Switch, reducing distraction while driving at night. No drastic redesigns have been observed, only minor refinements to internal circuitry to retain smooth rotation and crisp detents, a testament to signature Acura craftsmanship. Because the Headlight Switch is responsible for multiple current paths, a worn or faulty Headlight Switch can lead to flickering and dead lamps, so it is important to replace the Headlight Switch immediately if you drive at night frequently for legal reasons or want the consistently dependable driving feel that the MDX lighting controls are built for.

We provide a broad range of OEM Acura MDX Headlight Switch at unbeatable prices on our website. For your OEM parts, You can count on the guaranteed quality, manufacturer's warranty, outstanding customer service, and prompt delivery. We look forward to your visit.

Acura MDX Headlight Switch Parts Questions & Experts Answers

Turn Signal Blinker Light Lamp Switch
35255-STX-305
Q: How to replace Cruise Control Switch, Hazard Warning Switch and Headlight Switch on Acura MDX?
A:
You must remove the driver's switch panel in Pilot and MDX models to replace the Vehicle Stability Assist (VSA) OFF switch, cruise control, interior lighting and moonroof switches. Start by prying off the switch trim panel with a removal tool made for this task or a screwdriver. Then gently pull the panel out, disconnect the electrical cables by pressing the release on each cable. Slide the panel's locking tabs to open it, then push the switch you want to remove forward from the front of the control panel. Installation goes the other way. Inside the radio trim panel on 2006 and newer models, the hazard switch has a light bulb you can unscrew and replace. Start by wiggling the trim panel off using a trim panel removal tool, then take it out. To disconnect the electrical wires, press the release button to unlock them. To take a switch from the radio trim panel, lift the two small locking tabs and pull out the switch from its front position. Installation is done through the opposite steps.