To replace the front turn signal, parking, and side marker lights on Civic and CR-V models, start the engine and turn the wheels fully to the right for the left bulb or to the left for the right bulb, then stop the engine. Pry off the clips, remove the screws, and take out the inner fender cover. Rotate the bulb holder 1/4-turn counterclockwise to remove it, then push in on the bulb and turn it counterclockwise to pull it out. For the Integra, remove the lamp assembly securing screws and pull it out of the fender, then turn the bulb holder 1/8-turn counterclockwise to remove it and take out the bulb. For tail light and brake light replacement, open the trunk or rear hatch, remove the access cover, and for CR-V models, take out the taillight housing mounting screws. Turn the bulb holder 1/8-turn counterclockwise to remove it, push in on the bulb, turn it counterclockwise, and pull it out. For the high-mounted brake light on the Civic, remove the screw covers if equipped, take out the screws, and separate the housing from the body. Twist the bulb holder counterclockwise to remove it and take out the bulb. For the Integra, open the trunk, twist the bulb holder 1/4-turn counterclockwise, and pull the bulb straight out. On the CR-V, open the rear hatch, remove the high-mounted brake light cover, twist the bulb holder counterclockwise, and pull the bulb straight out. To access the instrument panel lights, remove the instrument cluster first, then rotate the bulb holder counterclockwise to remove it and pull the bulb straight out. For license plate lights, remove the two screws and pull out the lens, rotate the bulb holder 1/8-turn counterclockwise to detach it, and pull the bulb straight out. For dome, cargo, or trunk lights, carefully pry the lens off to access the bulb, remove the bulb from the terminals, and if necessary, pry only on the ends of the bulb to avoid shattering the glass. Installation is the reverse of removal for all components.
Posted by AcuraPartsWarehouse Specialist 
