To change all three lights - turn signal, parking, and side marker - unscrew the fender lamp assembly, pull it out, turn the bulb holding tube counterclockwise a small bit, and pull it free. Then remove the bulb from the holder. Installing the new lights is the opposite of this. To change the tail and brake light bulbs, first take off the trunk cover and remove the access panel, turn the bulb holder 1/8-turn clockwise, and it will come right out. Feel the bulb and turn it clockwise to remove it from the holder, then put it back in reverse order. Getting to the high-mounted brake light starts with opening your trunk. Turn the bulb holder 1/4-counterclockwise, pull it from the socket, and take the bulb out, keeping it straight. Put it back together by following these steps in reverse. Start by taking out the instrument cluster. Then use the palm of your hand to turn the bulb holder counterclockwise until it loosens, remove it, and pull the bulb straight out. To fix it back in, follow the steps in reverse. Unscrew the two screws holding the lens, turn the bulb mounter counterclockwise one-eighth turn, pull the bulb holder free, straight pull the bulb out, then reverse the steps to reinstall. To change a bulb for left-side dome lights, opening the rear trunk, or the right trunk, carefully unlock the lens and take out the bulb from its connections (gently cracking off each end when needed), then put it back in the same way you removed it.