Acura 54315-SR3-N82 Dudubuy Gear Shift Cable

Start by taking out the center console on Civic and Integra vehicles. Take the shift lever to the neutral spot and pull off the small piece that holds the cable adjuster in place. While jackstands keep the front of your vehicle raised, remove and replace the shift cable bracket. Lift off the part that holds the shift cable to the floorpan, disconnect the cable from the arm, and take out the cover. Before reinstalling, you need to fix the shift cable the right way back this time. Before continuing, remove the center console if you haven't done so already and shift into Neutral. Take off the retaining clip from the cable adjuster. You have two holes where marks are 90-degrees apart on the adjustment tool; fit the hole perfectly with the shift cable. To fix the alignment, first loosen and then tighten the locknut on the shift cable before making any adjustments. Put the retaining clip on the adjuster, but make sure it moves without resistance, because this tells you to keep adjusting until it does. Put the panel back on, match the marks by moving it, and lock the panel down tight with the screws. Locate the Neutral mark on the shift indicator panel. Make sure the shift lever matches this mark precisely when the transmission is in Neutral; adjust the panel if it doesn't. Begin the test drive, and make sure the gear shift works well in each gear.